Skip to content

Free written quotesLocal crews

Call now (239) 555-0135
(239) 555-0135 Get my free washing
Gray wood deck boards partly cleaned to warm tan color

Decks and fences in Bonita Springs

Deck pressure washing in Bonita Springs, FL

Gray, mossy or slippery wood cleaned at the right pressure so the grain is not torn up. Ask for a written quote.

  • Wood, composite and dock boards
  • Fences cleaned and prepped for staining
  • Quote in writing before work starts

Step 1 of 3

What needs cleaning?

What does deck and fence cleaning involve?

Deck pressure washing in Bonita Springs starts with looking at the material. Wood needs a different approach than composite, and a fence that is a bit soft needs a different one from a solid deck. The crew pre-treats mildew and gray weathering, cleans along the grain at modest pressure, then rinses well.

The aim is clean wood with the surface intact. Too much pressure raises splinters, leaves fuzzy, uneven patches and wears soft grain away faster than hard grain. That leaves lines you can see and feel, and the damage cannot be undone.

The same work applies to wood privacy fences, picket fences, pergolas, pool-side wood, railings and boat dock boards near canals and the river. Vinyl and aluminum fences are rinsed and cleaned gently.

Wood or composite: does the method change?

Pressure-treated and natural wood

Wood holds moisture and grows mildew in this climate. It turns gray in strong sun, and the top layer dies off. A restorative cleaner brightens the wood, and the crew uses a fan tip and light passes. Soft woods need a lighter hand than hardwoods.

Composite and PVC decking

Composite does not rot, but mildew can still grow in the grooves and shaded spots, and food or grease can stain the surface. It is cleaned with a cleaner made for it and a gentle rinse. High pressure can damage the surface texture and may void a maker's warranty.

If you are not sure what your deck is made of, send a photo. That is enough for a first answer.

What changes the price of deck and fence cleaning?

Price follows the work, not a flat rate per board. Expect these factors to matter:

  • Square footage of decking, plus the length and height of fencing.
  • The material and how weathered it is.
  • Old stain or paint that has to come off before new product goes on.
  • Railings, spindles and stairs, which take more time than flat boards.
  • Whether staining or sealing is quoted along with the cleaning.

Staining and sealing are separate jobs and separate costs. Ask for each on its own line. A larger outdoor project can also include a nearby slab, so see driveway pressure washing for concrete and pavers, or house washing for the walls next to the deck.

A typical deck with a set of stairs is often a half-day job. A long fence line adds more time. Rain, wind and the drying that follows can stretch the schedule.

Before the crew arrives

Clear furniture, planters and grills from the deck, and tell the crew about loose boards, protruding nails or screws that stick up. Move anything that should not get wet or splashed near fence lines.

After cleaning

Wood needs to dry fully before stain or sealer goes on. In humid weather that can take longer than you expect, often a couple of dry days. Staining over damp wood traps moisture and can fail early, so wait for the wood to dry and ask the crew or your stain maker for a moisture check.

When should I call?

Call when the boards turn slippery, when gray or green patches spread, or before you plan to stain or paint. Slick boards are a safety issue on stairs and by the pool, so do not wait for a fall. Many owners schedule cleaning after the heaviest summer rain, when the wood has had time to dry out.

If your community has rules about fence colors or condition, check them before you stain. For other exterior jobs, go back to the home page or look at roof soft washing if the streaks reach the roofline.

What you can expect

1

Free written quotes

2

Local crews

3

Safe soft-wash methods

4

Fast scheduling

Questions about pressure washing in Bonita Springs

Can pressure washing ruin a wood deck?

Yes, if the pressure is too high or the nozzle is held too close. It can gouge soft wood and raise splinters. The right approach uses low pressure, a wide fan tip and a cleaner that does most of the work. Tell the crew if your boards are old or soft.

Should I stain or seal the deck after cleaning?

Many owners do, since bare wood weathers quickly in sun and humidity. It is a separate step, and the wood must be completely dry first. Ask for staining to be quoted on its own line. A product made for exterior wood in a humid climate is a sensible starting point.

Can you clean a composite deck?

Yes. Composite is cleaned at lower pressure with a cleaner suited to it. Mildew in the grooves and shaded corners is the usual problem. Check the maker's care instructions, because some brands set limits on pressure and chemicals.

How often should a wood fence be cleaned?

It depends on shade, sprinklers and how close plants are. Fences that stay damp grow mildew faster. A fence is worth cleaning when it turns green or dark, ideally before the surface starts to break down.

Do you clean boat docks and pool-side wood?

Wood boards near water get slippery from algae, and cleaning helps. Tell us the material and how the boards are fastened. Docks over open water need extra planning for runoff and access, so describe the setup when you ask for a quote.

Request deck and fence cleaning

Tell us what you need and we call you back.

Step 1 of 3

What needs cleaning?

No obligation.

Ready when you are

Call now or request a quote online.

Call for a free quote Get my free washing quote
(239) 555-0135

How it works

  1. Send photos or request a visit

    Tell us what needs cleaning.

  2. Get a written quote

    Clear price before any work starts.

  3. We clean and tidy up

    Rinse, check and leave the site clean.

Takes about 30 seconds. Get my free washing quote